PSC PowerWedge 10, Руководство пользователя

Страница: 33 / 116

Programming the PowerWedge 10
User’s Guide
28
Serial Programming Parameters
You can use batch programming to set serial parameters for the Power-
Wedge 10 Serial model. This section describes the parameters; bar codes
for setting them begin on page 48. (For a complete listing of parameters
and defaults, see
Programming Options on page 34
.)
This section also includes a table of Code 39 and ASCII equivalents for
serial characters (see page 32). Use the Code 39 equivalents when creating
bar codes for batch programming.
Data Type (I.D. #C0)
This parameter determines the data content transmitted to or received
from the host. The
ASCII
setting transmits and receives the standard ASCII
character set (with the exception of the null character, ASCII 00h, which
is received as 80h). The
PC SCAN CODES
setting transmits the press-and-
release codes for the keys on a PC keyboard.
BF Numeric keypad
( page 77)
Transmits numeric keypad values instead of the number
keys in the top row of the keyboard. (Some applications
recognize a difference between a number typed on the
top row of the keyboard and the same number typed
on the keyboard’s numeric keypad.)
C0 Host device
(page 79)
Identifies the host computer type. This setting is not
affected by the predefined defaults (D0–D2).
Table 1. General Programming Parameters (Continued)
I.D.
#
PARAMETER DESCRIPTION
NOTE
Bar codes for setting data type are on page 48.