PSC Falcon PT40, Руководство по продукции

Страница: 58 / 122

Transferring Files and Data
3-6
Falcon
®
PT40
Logging Tab
Select the
Logging
tab to establish settings for the communications log. The
communications log can be helpful as a trouble-shooting aid.
Figure 3-4. Logging Tab of the File Transfer Utility
Sending and Receiving Data with XFER32
Verify that the PT40 is properly attached to the host PC. If you have a PT40
dock for your PT40, make sure that the dock is properly attached to the PC.
Refer to
Transmit Files
, below for specifics on sending files. Refer to
Receive
Files on page 3-7
for specifics on receiving files
File Transfer Default Enter the
File Transfer Default
folder for storing received
files. Use the
Browse
button to locate a new location.
Log To File Specifies that the log is to be written to a text file.
Log To Screen Specifies that the log is displayed on screen.
Append to Log This option becomes available when you select
Log to File
.
When enabled,
Append to Log
adds log information to the end of
the log file. If not enabled, new log information replaces the previ-
ous log file.
Log Path/
Filename Specify the location for storing the communications log. If a path
is not given, the file is stored in the
Default File Transfer
folder.
Browse Use the
Browse
button to locate a new log file.
2340.book Page 6 Wednesday, January 29, 2003 12:50 PM