PSC Scanning Imager 8000 Скачать руководство пользователя страница 34 | Manualshive

Страница: 34 / 88

PSC Scanning Imager 8000 Скачать руководство пользователя страница 34

28

Imager 8000

2D Handheld Reader

Symbology Configuration

These fields control how symbols are captured and decoded and how
the decoded data is sent to the host system. The following symbolo-
gies are supported:

1-D Symbologies

Codabar, Code 128, Code 39, Code 93, EAN-8, EAN-13, UPC-A, UPC-
E, Interleaved 2 of 5, and Reduced Space Symbology (RSS).

2D Symbologies

Matrix —

Data Matrix, Maxicode (modes 0 to 6)

Stacked —

PDF417

QR Code —

QR

Other Symbologies

Postal Symbols —

US Postnet, US Planet, Australian Postal, and Japan

Postal.

Composite Symbols —

RSS-14 Composite, and UCC-28 Composite.

Edit Format

Edit Format applies to all symbologies and affects how the decoded
data is transmitted to the host.

Data Editing

[Default = ‘%D%’]. Along with the generic pream-

ble and postamble, and the symbolic specific AIM

1

- ID,

you can also edit decoded data uniquely for each sym-
bology. This feature gives you the ability to format and
edit the actual decoded data. Refer to

for more information on preamble, postamble, and AIM-
ID.

Format controls consist of literals and data edit specifiers.
ASCII characters that are not enclosed within the percent
signs (%) are literals and will be added to the output data
as is. Literals may include all ASCII characters, and may
precede or follow data.

Decoded data edit specifiers are ASCII characters that
specify how data from the captured bar code, or 2D sym-
bol is added to the output data to the host.

1. AIM is the worldwide authority on automatic Identification, date collection, and networking

in a mobile environment. For more information visit to their web site at

aimglobal.org

.

«
...
32
33
34
35
36
...
»

Содержание Imager 8000

























































































Отзывы:

Нет отзывов