OWNER’S MANUAL
MODEL
CD36C
Prizelawn
®
COMMERCIAL DROP SPREADER
Страница 1: ...OWNER S MANUAL MODEL CD36C Prizelawn CD36C COMMERCIAL DROP SPREADER ...
Страница 2: ... secure with 2 1 4 20 X 1 1 2 Hex Bolts Lockwashers and nuts 5 Slide the ends of the Control Tube Braces over the Studs on the Shutoff Bar Brackets secure with Cotter Pins Attached opposite end of Control Tube to the Handle Lever using 1 4 dia Clevis and Cotter Pin Make sure Handle Lever operates freely Tighten all Nuts left loose in step 1 I 6 To check spreader for completed shutoff pull the Hand...
Страница 3: ...ousing Spring and Agitators at the Center Bearing Lubricate Axle Bearings with grease Store spreader in open position The following procedure provides a means of accurately determining drop spreader settings when settings do not appear on the package or to fine tune the manufacturer s recommend settings Spreader rates can vary due to walking speed condition of turf humidity physical characteristic...
Страница 4: ... 1 AGITATOR AXLE ASSEMBLY LH 3 LH 14644 1 AGITATOR AXLE ASSEMBLY RH 4 14231 BEARING SUPPORT ASSEMBLY 5 14235 AGITATOR BAFFLE 2 6 14227 END HANGER 2 7 14007 AXLE GREASE SEAL 2 8 14222 1 PLATE ASSEMBLY BEARING END 2 9 90005 GREASE FITTING 2 10 14006 AXLE BEARING 2 11 15032 WHEEL TIRE ASSEMBLY 2 12 12714 LEG 2 13 12704 RATE CONTROL KNOB 2 14 14237 TIE BAR 15 14286 SPRING HOUSING ASSEMBLY 2 16 12708 P...
