PS Engineering
PMA450B Audio Selector Panel and Intercom System
Installation and Operator’s Manual
200-450-0600
Page 2-12
Rev. 5, August 2020
2.7.4
IntelliAudio Location Setup
This adjustment allows the Spatial Audio inputs to be “relocated” on any of nine (9) defined “Head Related
Transfer Function” (HTRF) locations.
Push More. . .
→
IntelliAudio
→ IntelliAudio Config
to access. In the IntelliAudio® mode, repeated
pressing of the COM 1 or COM 2 line select buttons moves the corresponding half-circle cursor to the loca-
tions relative to the listener graphic in sequence.
Pressing the “
Do
ne”
button exits the configuration setting mode. This setting is recalled at system power
up.
IntelliAudio – True Dimensional Sound, Spatial Location Display, showing C1 at 30°left and C2 at 90°
right of center.
Exit the user setup page by turning the PMA450B off.
2.7.5
Bluetooth® menu
The Bluetooth menu allows the user to:
•
Reset (remove) all paired devices
•
Set or disable a pairing pass code (factory set for “disable”)
•
Change the PMA450B’s device ID name.
2.7.5.1
Un-pair All (Resets Bluetooth)
Pressing the line select next to Un-pair All removes all Bluetooth devices. This is used when the pairing of
devices becomes unreliable.
