Pairing with a Wireless PTT Button
The PRYMEBLU Advanced Adapter is compatible
with a few different wireless PTT buttons:
• PRYMEBLU BT-PTT2, which uses conventional BT.
• PRYMEBLU BT-PTT-Z or PRYMEBLU BT-PTT-ZU,
which use a special form of BT called BT Low Energy (BLE).
To pair the adapter with a PTT button, follow these steps:
* Power off the two-way radio and all BT devices to be used, including the PRYMEBLU Advanced Adapter,
the wireless BT PTT Button, and any BT audio accessories. You should also power off phones, tablets,
and other nearby devices with BT technology during the pairing process.
* Power on the radio that the PRYMEBLU Advanced Adapter is connected to. Wait until the radio
has fully booted up. This can take up two three full seconds.
* Power on the PRYMEBLU Advanced Adapter using the Power Switch while holding down the TALK button.
* Continue to hold the Talk button down until the status LED begins to flash two times per second.
Note that the LED on the adapter may show several single flashes before shows double flashes. This can
take approximately three to five seconds.
* Release the Talk button. The PRYMEBLU Advanced Adapter is now in audio accessory pairing mode.
To enter PTT pairing mode, proceed to the next step.
Continued on next page
Charging the PRYMEBLU Advanced Adapter
The PRYMEBLU Advanced Adapter has an internal Lithium Ion rechargeable battery pack which must be
charged prior to using and must be recharged regularly. A fully charged battery will provide more than
12 hours of operation before needing to be recharged. However, operating time can vary depending on
usage and the condition of the battery pack. Recharge the battery regularly.
To charge the PRYMEBLU Advanced Adapter:
1. Ensure the PRYMEBLU Advanced Adapter is turned off,
using the switch located on the device.
2. Plug the supplied wall charger into a standard AC outlet.
3. Plug the charger into the charge jack on the PRYMEBLU Advanced Adapter.
4. Once the charging process has begun, the LED indicator on the PRYMEBLU Advanced
Adapter will show a constant red light. Typical charge time is approximately 5-6 hours.
Actual charge time will vary depending on several factors including the battery’s charge
state, condition, and age.
6. When done charging, the LED on the PRYMEBLU Advanced Adapter will turn off.
Always disconnect the charger from the adapter when charging is completed.
Charging Cautions:
- Use only the wall charger supplied by the manufacturer. Do not use any other charger.
- Do not use a wall charger that appears to be damaged. (Example: frayed wires, melted plastic, etc.)
Contact PRYME to get a new manufacturer-approved replacement charger.
- Do not tamper with or modify the PRYMEBLU Advanced Adapter or charger.
- Always turn the power switch to the off position when charging the PRYMEBLU Advanced Adapter.
QUICK START
1. Charge the PRYMEBLU Advanced Adapter.
2. Connect the PRYMEBLU Advanced Adapter to a compatible two-way radio.
3. Pair the PRYMEBLU Radio Adapter with a compatible wireless audio accessory.
4. Pair a PRYMEBLU Wireless Push-to-Talk button with the PRYMEBLU Advanced Adapter (optional).
5. Test and use.
2
3
4
Advanced BT Adapter Applicable Models: All TWO PIN BT
-5xx-V2
models that mount dir
ectly on the radio
Made in T
aiwan
FCC ID: XTS-BT
-503
BT
-501-V2 and BT
-503-V2
PR
YME® and PR
YMEBLU® are trademarks o
wned by PR
YME Radio Products,
Brea CA.
All other product or ser
vice names are the property of their respective o
wners.
© 2021 PR
YME Radio Products,
Brea CA.
All Rights Reser
ved
Feder
al C
ommunic
ation C
ommission In
ter
fer
enc
e S
ta
temen
t
Feder
al C
ommunica
tion C
ommission I
nt
er
fer
enc
e Sta
temen
t
This equipmen
t has been t
est
ed and f
ound t
o c
omply with the limits f
or a Class B
dig
ital devic
e, pursuan
t t
o P
ar
t 15 of the FC
C Rules
. T
hese limits ar
e desig
ned t
o
pr
ovide r
easonable pr
ot
ec
tion against har
mful in
ter
fer
enc
e in a r
esiden
tial
installa
tion.
This equipmen
t gener
at
es uses and can r
adia
te r
adio fr
equenc
y
ener
gy and
, if not installed and used in ac
cor
danc
e with the instruc
tions
, ma
y
cause har
mful in
ter
fer
enc
e t
o r
adio c
ommunica
tions
. Ho
w
ev
er
, ther
e is no
guar
an
tee tha
t in
ter
fer
enc
e will not oc
cur in a par
ticular installa
tion. I
f this
equipmen
t does cause har
mful in
ter
fer
enc
e t
o r
adio or t
elevision r
ec
eption, which
can be det
er
mined b
y tur
ning the equipmen
t off and on, the user is enc
our
aged t
o
tr
y t
o c
or
rec
t the in
ter
fer
enc
e b
y one of the f
ollo
wing measur
es:
-R
eor
ien
t or r
eloca
te the r
ec
eiving an
tenna.
-I
ncr
ease the separ
ation bet
w
een the equipmen
t and r
ec
eiv
er
.
-
Connec
t the equipmen
t in
to an outlet on a cir
cuit diff
er
en
t fr
om tha
t t
o which
the r
ec
eiv
er is c
onnec
ted
.
-
Consult the dealer or an exper
ienc
ed r
adio/T
V t
echnician f
or help
.
FC
C C
aution: An
y changes or modifica
tions not expr
essly appr
ov
ed b
y the par
ty
responsible f
or c
omplianc
e c
ould v
oid the user's author
ity t
o oper
at
e this
equipmen
t.
This devic
e c
omplies with P
ar
t 15 of the FC
C Rules
. Oper
ation is subjec
t t
o the
follo
wing t
w
o c
onditions: (1)
This devic
e ma
y not cause har
mful in
ter
fer
enc
e, and
(2) this devic
e must ac
cept an
y in
ter
fer
enc
e r
ec
eiv
ed
, including in
ter
fer
enc
e tha
t
ma
y cause undesir
ed oper
ation.
This equipmen
t c
omplies with FC
C RF r
adia
tion exposur
e limits set f
or
th f
or an
unc
on
tr
olled en
vir
onmen
t.
To main
tain c
omplianc
e with FC
C RF exposur
e
complianc
e r
equir
emen
ts
, please a
void dir
ec
t c
on
tac
t t
o the tr
ansmitting an
tenna
dur
ing tr
ansmitting
.
RF
Exposur
e W
arning!
Please keep pr
oduc
t 20cm a
w
ay fr
om y
our
body or b
ystander dur
ing the r
adio oper
ation.
The t
ypical handheld t
w
o-
w
ay r
adios w
er
e
cer
tified under mobile usage c
ondition
(i.e
. keep 20cm a
w
ay fr
om the user body)
and use of such r
adio closer than 20cm ma
y
ex
ceed the US RF exposur
e limit
and shall be a
voided
.
Version 2.00 APRIL 2021
91
1 Mariner St., Brea, CA
92821
PH: 714.257.0300 F
AX: 714.257.0600
TOLL
FREE: 800.666.2654 WWW
.PR
YME.COM
Controls and Connection
Radio Connector
This two-pin connector
plugs into the SP/MIC jack on
a compatible two-way radio.
STATUS LED
The LED flashes messages that
let the user know the current
status of the PRYMEBLU Adapter.
POWER SWITCH
This slide switch is used
to power the PRYMEBLU
Advanced Adapter on or off.
CHARGE JACK
This micro-USB jack is used
to recharge the internal battery
of the PRYMEBLU Advanced
Adapter by connecting it to
a 5-Volt USB charger.
NOTE: BT-503-V2 model shown.
Other models may vary slightly
in appearance.
Multi-Function Talk Switch
ThIs button is used to place the PRYMEBLU
Advanced Adapter in pairing mode. This switch
can also be used to activate the Push-To-Talk
function of the 2-way radio.
BT
-503-V2 model shown
Other models may var
y
slightly in a
ppearance.
BT
-PTT
-Z (mini)
(Optional Push-T
o-T
alk
button sold separa
tely
.)
PR
YMEBLU
®
BT
-5xx-V2 USER’S GUIDE
ADV
ANCED BT ADAPTER
for
portable radios
with TWO PIN radio-mounted connectors
The PR
YMEBLU advanced ada
pter allo
ws you to use a compa
tible
wireless headset or other audio accessor
y with your
portable two-way radio.
Connecting the Adapter to Radio
To connect your PRYMEBLU Advanced Adapter to a two-way radio, follow these steps:
* Always turn off your two-way radio before connecting the
PRYMEBLU Advanced Adapter.
* Plug the PRYMEBLU Advanced Adapter into the
speaker mic jack of your two-way radio. Press gently
but firmly until the connector is fully seated.
* On some models of two-way radio, you may need
to tighten one or more retaining screws in order to
ensure that the PRYMEBLU Advanced Adapter
remains securely attached to the radio
Pairing with a Wireless Audio Accessory
* Power off the two-way radio and all BT devices to be used, including the PRYMEBLU Advanced Adapter,
the wireless BT PTT Button, and any BT audio accessories. You should also power off phones, tablets,
and other nearby devices with BT technology during the pairing process.
* Power on the radio that the PRYMEBLU Advanced Adapter is connected to. Wait until the radio
has fully booted up. This can take up two three full seconds.
* Turn the PRYMEBLU Advanced Adapter using the Power Switch while holding down the TALK button.
* Continue to hold the Talk button down until the status LED begins to flash two times per second.
This can take approx. 3-5 seconds.
* Release the Talk button. The PRYMEBLU Advanced
Adapter is now in audio accessory pairing mode.
* Activate the pairing mode on your compatible wireless audio
accessory using the process provided by that device’s manufacturer.
* Keep the PRYMEBLU Advanced Adapter and wireless audio accessory
close to each other and wait a few seconds.
* Once the audio accessory and adapter are paired with each other,
the status LED on the adapter will show a long blue flash and then
begin to flash approximately once every second. Once successfully
paired, you will be able to operate your two-way radio using your
compatible wireless accessory.
