3
4
Federal Communication Commission Interference Statement
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates uses and can
radiate radio frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the interference by one
of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver
is connected.
- Consult the dealer or an experienced radio/TV technician for help.
FCC Caution: Any changes or modifications not expressly approved by the party responsible
for compliance could void the user's authority to operate this equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) this device must accept
any interference received, including interference that may cause undesired operation.
This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled
environment. To maintain compliance with FCC RF exposure compliance requirements, please
avoid direct contact to the transmitting antenna during transmitting.
PTT COMPATIBILITY INFORMATION:
For Apple iOS Devices:
BT-PTT-Z works with Wave Communicator and Zello POC apps.
BT-PTT-U works with AT&T EPTT, ES Chat, Verizon PTT Plus, and Zello POC apps.
NOTE: The wireless PTT button is optional and may be sold separately.
Controls and Connection
ACCESSORY CONNECTOR
The 3.5 mm audio connector on
the SPM-1399 connects the kit to the
earphone jack on your smart device.
BUILT-IN MICROPHONE
The microphone in the SPM-1399 kit is used for making
PTT Over Cellular (PoC) transmissions and making phone
calls. For best results, the microphone should be positioned
a maximum of 6-9” away from the user’s mouth
EARPHONE ASSEMBLY (Replaceable, RA-C101199-TC)
The entire earphone assembly including the twist-connect (P-CON-TC),
acoustic eartube (P-TUBE-C), acoustic elbow (P-ELBOW) and earbud (P-BUD)
is available as one convenient part for easy replacement or for users needed
additional earphones.
EARBUD (Replaceable, P-BUD)
The rubber earbud is placed inside the user’s ear canal
when the earphone is worn. Other styles of earbud are
optionally available for increased comfort and situational
awareness.
ACOUSTIC ELBOW (Replaceable, P-ELBOW)
This PVC plastic elbow connects the eartube
and earbud.
ACOUSTIC EARTUBE (Replaceable, P-TUBE-C)
The included clear “surveillance style” tube carries
audio from the speaker transducer to the user’s ear.
The eartube may require periodic cleaning to prevent
blockages, which can reduce volume levels. A black-
colored eartube is optionally available
(part number P-TUBE-B).
TWIST-CONNECT (Replaceable, P-CON-TC)
Rotating the twist connect allows the entire
acoustic tube earphone to be removed from
the kit. This makes It possible for multiple users
to share the same kit while having their own
earphones for hygiene purposes. Additional
earphone kits are sold separately
(part number RA-C101199-TC).
EARPHONE CLIP (Replaceable, P-CLIP-TC)
The alligator-type clip secures the earphone
to the collar of the user’s clothing during use.
EARPHONE TRANSDUCER (Replaceable, P-SPK)
The transducer produces receive audio that is heard by the
user when the SPM-1399’s earphone is worn. In the event
of failure, the transducer is removable and can be replaced.
EARPHONE CONNECTOR
This 2-pin connector joins the
speaker transducer to the cable
of the SPM-1399 kit. It can be
unplugged from the transducer
in the event that replacement
is needed.
MODELS COVERED BY THIS MANUAL:
• SPM-1399-A
- for Apple iPhone/iPad/iPod Touch and other compatible smart devices. No PTT button included.
• SPM-1399-A-PTTZ
kit - for Apple iPhone/iPad/iPod Touch and other compatible smart devices. Includes
BT-PTT-Z
button.
• SPM-1399-A-PTTU
kit - for Apple iPhone/iPad/iPod Touch and other compatible smart devices. Including
BT-PTT-U
button.
PRYME SPM-1399 MIRAGE™ Series
PTT Over Cellular (PoC) Surveillance Mic Kit
The SPM-1399 is a lapel microphone kit with an acoustic tube “surveillance” style
earphone for use with Smart Devices running Push-to-Talk over Cellular (PoC) apps.
Made in Taiwan
PRYME® is a trademark owned by PRYME Radio Products, Brea CA. All other product or service names are the property of their respective owners.
© 2018 PRYME Radio Products, Brea CA. All Rights Reserved
Version 1.00 9 DECEMBER 2016
Note: Wireless PTT button
shown is optional and may
be sold separately.
CLOTHING CLIP
The alligator-type clip secures the SPM-1399
to the lapel of the user’s clothing during use.
The clip can be rotated to allow the microphone
to be better positioned.
PTT Button
Press this button to activate
the Push-to-Talk function of
your POC app
Velcro Fastener
The Velcro fastener is used
to secure the PTT button to
your person or any other
convenient location during use.
Note: Wireless PTT button shown is
optional and may be sold separately.
911 Mariner St., Brea, CA 92821
PH: 714.257.0300 FAX: 714.257.0600
TOLL FREE: 800.666.2654
WWW.PRYME.COM
