manualshive.com logo in svg

PRÜFTECHNIK VIB 5.300 EX Series, Руководство по эксплуатации

Поделиться
Скачать
PRÜFTECHNIK VIB 5.300 EX Series Скачать руководство пользователя страница 151

6-5

VIBXPERT 11.2010

Appendix - VIBXPERT utility

VIBXPERT utility

The 'VIBXPERT utility' tool can be used for the following tasks:
-

Updating firmware (with the VIBXPERT update tool)

-

Saving and restoring results and settings

-

Formatting the CF memory card

-

Export results in CSV format (Phase, Balancing, ODS analysis)

-

Loading screen contents onto the PC.

-

Loading PDF files onto the PC.

-

Calling up the 'db spectra' program to convert narrow band
spectra to third octave spectra.

-

Converting spectra, time signals, impact tests and phase measure-
ments to the UFF file format for evaluation in other analysis
programs.

-

Converting timewave recording measurement files to the IEEE
format for further processing in the DASYLab analysis program.

-

Transferring language and help files for translation (for autho-
rized PRÜFTECHNIK representatives only).

Installing and starting the program

The installation program ('VibXpert_utility_

version

.exe) can be found

on the PRÜFTECHNIK homepage (www.pruftechnik.com) or on the
Condition Monitoring CD (included with the delivery):

• Double click on the file to start the installation.
• Follow the instructions on the screen.
• To start the program, open the Windows START menu and select

'Programs / PRÜTECHNIK Condition Monitoring / VIBXPERT
utility / VIBXPERT utility.

Alternative

: In the installation directory* double click on 'vxpTool.jar'.

Show version number

Select language

A start screen appears in which all available functions are accessible
via buttons:

* C:\Programs\Pruftechnik\vibxpert\VIBXPERT utility

Содержание VIB 5.300 EX Series













































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды