PRÜFTECHNIK OPTALIGN smart RS5 BT, Руководство пользователя

Страница: 11 / 194

11
Chapter 2: Safety notes and operating
information
2.1 Safety notes
OPTALIGN smart RS5 BT is to be used in industrial environments only for shaft
alignment. Care must be taken to ensure that the instrument is not subjected to
mechanical knocks. OPTALIGN smart RS5 BT must be operated only by properly trained
personnel. No liability will be assumed when components or operating procedures as
described in this manual are altered without permission of the manufacturer.
2 .1 .1 Safety symbols
The following symbols are used in this manual in order to draw the reader’s attention
to especially important text, such as that regarding possible sources of danger or
useful operating tips.
This symbol denotes general information and tips regarding operation of
OPTALIGN smart RS5 BT.
This symbol denotes information which must be followed in order to avoid
damage to equipment.
This symbol denotes information which must be followed in order to avoid
personal injury.
This laser safety warning symbol denotes laser radiation.
Numbers in red circles indicate the corresponding operating step described in
these instructions and must be performed exactly.
2 .1 .2 CE compliance and electromagnetic compatibility
OPTALIGN smart RS5 BT components fulfills the EC Guidelines for electric devices and
those relating to electromagnetic compatibility as indicated in the respective conform-
ity certificates. The certificates may be downloaded from the PRÜFTECHNIK website.
2 .1 .3 IP classification
The computer, sensor and laser comply with code IP65 (dust-tight and protected
against water jets.
H
Note
a
CAUTION
s
WARNING
1
Safety notes