Prozis will always be available for any additional explanation through our customer support communication channels, found at
www.prozis.com/support
.
To avoid any impact on the environment or human health due to dangerous sub- stances present in electrical and electronic devices, the
end users of such devices are expected to understand the meaning of the symbol consisting of a crossed-out waste container. Do not
dis- pose of electrical and electronic equipment along with unsorted household waste, instead dispose of it separately and properly.
The packaging that protects the device against transport damage is made of non-polluting materials that can be disposed of via local
recycle bins.
EN
Prozis is a registered trademark of
PROZIS.COM, S.A.
Prozis reserves the right to adjust or modify the product or any of the associated documentation in order to ensure its suitability for use, at any time
and without prior notice.
The most recent version of this document, which may contain such adjustments or modi cations, is available for reference at
www.prozis.com
.
Legal Compliance Declaration
By means of this document, Prozis declares that the
PIX-E - PORTABLE PROJECTOR
is fully compliant with all the standards specified in the
applicable legislation as well as other relevant clauses.
5
Safety Warnings
This symbol highlights dangerous situations which
can lead to light injuries, or damage, malfunction,
and/ or destruction of the device.
Do not look directly at the projector lens nor point IT towards
people or animals.The strong light will flash your eyes and
cause slight pain if close to the lens.
This device can be used by children 8 years old and over, and by people with reduced physical, sensory or mental capabilities or lack of experience
and knowledge provided their use is supervised or they have been given instructions concerning the use of the device in a safe way and understand
the hazards involved.
Children must not play with this device.
Cleaning and maintenance must not be handled by unsupervised children.
To prevent harm or damage from happening to users or others, make sure to comply with the requirements below.
• Do not use the device if any part is broken or missing.
• Do not use damaged power cords, accessories, and other parts with your projector.
• Do not block or place anything near the projector’s ventilation holes. Doing so may cause internal heat build-up. Also, do not place your hands near
its ventilation port as it may cause injuries.
• Do not expose the device to heat sources or flammable substances.
• Do not expose the projector to electromagnetic interference.
• Do not place liquids near or on the projector. Liquids spilled into the projector may cause it to fail.
6
EN
