6
User manual
PACKAGE CONTENTS
• 1 × PROZIS LUMINY - Motion Sensor LED Bar
• 1 × USB Charging Cable
• 1 × User Manual
• Mounting Accessories
MAINTENANCE AND CLEANING
1. Switch off the product and remove all plugs before cleaning!
2. When cleaning the components, do not use aggressive or abrasive cleaning agents or materials such as
scouring milk or steel wool. These could damage the upper surface of the appliance!
3. Protect the device from water drops and water spray. Use only a clean, dry cloth for cleaning the
appliance and never use any corrosive liquids. Use a slightly damp cloth and a mild cleaning agent to
remove stubborn dirt.
STORAGE
• When no longer using the device, store the product in a dry environment, protected from
dust and direct sunlight.
• If the appliance is not going to be used for a long period of time, you should recharge it on
a regular basis. This helps maintain battery performance.
• Store your appliance on the original case provided.
PRODUCT OVERVIEW: SEE PAGE 2, FIGURE A
1.USB charging port 2.Power switch 3.Motion sensor 4.LED light
INSTRUCTIONS
How to use
Mounting methods: see page 2, figure B
B1. Slidable wall plate B2. Adhesive plate B3. Magnet B4. Fixed bracket
The light bar is suitable to be mounted to the underside of a cabinet, without affecting LED
lifetime or light output. Make sure to set it up in a solid, dry location.
Caution: Mounting screws supplied are designed for under cabinet mounting only. If you
intend to mount the product on a wall, you will require suitable fasteners and rawlplugs.
Installation is mainly focused on installing using the wall plate or bracket.
EN
