Nano Connect Enclosed in Card Reader
Nano Connect Wiring
Certifications
FCC
Tune up power table BLE
●
Each product is programmed with the pre-defined RF parameters
●
Each product RF power level is measured to ensure the power level not exceeding the target
power level, in a fully calibrated setup
●
These settings cannot be changed
Please find below the Maximum Transmit Power for production units:
<For BMD301>
Band / Mode
Average Power (dBm)
LE
GFSK
|
16 User Manual and Installation Guide: Mobile Reader Nano Inline & Mobile Reader Nano Connect
This document may have been updated since printing — for the latest, please visit https://proxy.com/s/nano-install
