Proximus Forum Phone 516 Скачать руководство пользователя страница 86

Страница: 86 / 156

Special Calls/Functions

Telephoning

Further information

For further information about automatic call recording or if you have
questions about your authorisation, contact the system administrator.

Doorbell, Door Opener

A doorbell is signalled to your call key and appears in the display. If the call
number of the door has its own phone book entry, or the system administrator
assigned a name when the doorbell was configured, the name of the doorbell
is displayed.

Opening the door while the handset is on hook

Opening the door during a call

Lift the handset.

Press the MenuCard key.

To open the door, select the

Door opener

menu item in the

MenuCard displayed.

If the doorbell signal is triggered during a call, you will hear
the call waiting tone.

Press the call key to which the door call is being signalled.
This puts your first call on hold and connects you to the
visitor at the door.

Press the MenuCard key.

To open the door, select the

Door opener

menu item in the

MenuCard displayed.

Press the call key again.

You are now reconnected to the subscriber you put on hold.

Содержание Forum Phone 516





























































































































































Результаты поиска

Содержание Forum Phone 516

Отзывы:

Бренды по названию

Популярные бренды

Proximus Forum Phone 516, Руководство пользователя

Результаты поиска

Содержание Forum Phone 516

Отзывы:

Бренды по названию

Популярные бренды