Proximus Forum Phone 516 Скачать руководство пользователя страница 74

Страница: 74 / 156

Enquiry, Toggling, Transfer and Conference

Telephoning

Internal/External Three-Party Conference

You have dialled an internal or external enquiry call (see the section entitled

Enquiry/Toggling by means of the R-Key or Another Call Key

starting on

page 69).

Note:

Interconnecting the two conference subscribers or removing one
of them from the conference is only possible using the appro-
priate menu item in the MenuCard. 3-party conference connec-
tions are not available.

If you wish to speak to one of the conference subscribers separately again or
remove one of them,

MenuCard “Conference”

Briefly

press the MenuCard key, then select the following from the

Conference

MenuCard …

Disconnect: 34565483

: This removes an external subscriber from the

conference.

Disconnect: 1234

: This removes an internal subscriber from the conference.

If the subscriber answers, inform them of the conference and

select the

Conference

menu item from the MenuCard

Subscr on hold

. The conference is started.

End the conference by hanging up or pressing the disconnect
key.

Press this subscriber’s call key. You are now speaking with
this subscriber, while the other subscriber is on hold. Now
you can toggle again.

End your conversation with this subscriber by pressing the
disconnect key and

Then press the call key of the subscriber on hold.

Содержание Forum Phone 516





























































































































































Результаты поиска

Содержание Forum Phone 516

Отзывы:

Бренды по названию

Популярные бренды

Proximus Forum Phone 516, Руководство пользователя

Результаты поиска

Содержание Forum Phone 516

Отзывы:

Бренды по названию

Популярные бренды