Proximus forum 523 Скачать руководство пользователя страница 73 | Manualshive

Страница: 73 / 228

Proximus forum 523 Скачать руководство пользователя страница 73

Configuring the Forum 523/524

Configuration

71

Please note:

The system PIN is preset to “0000” and it is absolutely imper-
ative that the system administrator changes it to prevent unde-
sirable remote maintenance.

In order for the system technician to be able to log into the Forum 523/524,
he requires a user name and password. In this case, the solution would be to
configure a “Service” user assigned to the “Administrators” user group.

Using remote configuration, all Forum 523/524 settings (with the exception
of the system PIN) can be edited or updated. New software versions of the
Forum 523/524 and the software for the connected system terminals and
base stations can also be installed (see the

System: Firmware

menu in the

Configurator

).

For security reasons, settings in the

Configurator

,

Network

menu should only

be edited on site to avoid malfunctions or failures in the customer’s LAN (e.g.
due to IP address conflicts). Refer to the chapter entitled

Configuration

starting on page 75, where interaction between the Forum 523/

524 communications system and a LAN is explained.

Forced Logoff of Another User by the Administrator

If the user “Administrator” logs in and another user with administration rights
is already logged in, then the administrator can forcibly log the other user off
in order to configure. This functionality, for example can be used, when
configuring remotely, when a user has forgotten to log out.

In order to forcibly log a user off:

1.

The “Administrator” user logs-in with the administration password.

2.

They open the

Configurator

.

A message shows which user is currently configuring the system.

3.

The administrator clicks on the

Take over config rights

button.

The other user can make no further modifications of the configuration.

Codes for IP Configuration

The IP configuration of the Forum 523/524 is performed on the Web console
in the

Configurator

, in the

Network: LAN

menu.

In the event that the IP configuration of the Forum 523/524 has to be
changed and access via the Web console is not possible, you can also use a

«
...
71
72
73
74
75
...
»

Содержание forum 523





































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды