47
Step 4: Assign a Computer Name
Each computer is assigned a name so that it can be easily identified by the
other devices on the network. The Symphony Composer Installation Wizard
will determine if your computer has already been assigned a name.
If prompted, enter a Computer Name for the computer and click <Next>. The
Computer Name may be up to 15 alphanumeric characters long.
Step 5: Select Drives and Printers to Share
The Symphony Composer will generate a list of the computer’s hard drives,
CD-ROM drives, floppy drives, and printers that may be shared with other
computers on the cordless network, as shown below.
Check the box to the left of each resource entry to allow other computers to
access that particular resource over the network and click <Next>.
Note that the Composer will display two configuration screens: one for
sharing drives and one for sharing printers. When sharing a computer’s drive,
click the box to the left of a resource multiple times to toggle between
several access levels that may be granted to remote users. The options are
Read/Write access, Read Only access, or no access.
