22
LED Indicators, Ports, and Buttons
The Symphony-HRF Cordless Gateway has four functional LEDs: three on
the top of the unit and one on the back panel. The LEDs on the top panel, as
shown in Figure 5 below, perform the following functions:
G
The Power Indicator LED or Status LED (which is located on the
left side when the unit is orientated so that you can read the
Symphony logo) turns green when the unit is powered on and
operational. This LED will remain off during boot-up while the
Cordless Gateway searches for a HomeRF or OpenAir network to
join. If the Cordless Gateway cannot locate an existing HomeRF
or OpenAir network, it will start a new HomeRF network. During
the search process, the Power Indicator LED may remain off for as
long as 12 seconds.
G
The Cordless Network Activity LED (located in the center of the
three LEDs) blinks green when the Cordless Gateway receives
data from the cordless network.
G
The Ethernet LED (on the left side) blinks green when the
Cordless Gateway receives data over the 10Base-T Ethernet
connection.
Figure 5
Top Panel LEDs
Power Indicator LED
Cordless Activity LED
Ethernet LED
