115
9. Adding a New Product to a Cordless Network
In the future, if you decide to increase the number of computers on the
cordless network or decide to add a Symphony-HRF Cordless Gateway to an
existing network, you may need to reconfigure the computers on the cordless
network. Below are some guidelines for reconfiguring a Symphony Cordless
Network.
Note:
There can be only one shared device (modem, Ethernet card,
Ethernet Bridge, or Cordless Gateway) on a Symphony Cordless
Network.
Adding a New Computer to a Cordless Network
If you are adding a new computer to an existing cordless network with a
Symphony-HRF Cordless Gateway, then simply follow the installation
instructions in Chapters 3, 4, and 5 to configure this new addition to the
cordless network.
Adding a Symphony-HRF Cordless Gateway
to a Cordless Network
If you have an existing cordless network to which you want to add the
Symphony-HRF Cordless Gateway, follow these steps:
1.
Shut down all computers on the cordless network.
2.
Install the Symphony-HRF Cordless Gateway. The installation
procedure for the Cordless Gateway is described in Chapter 3 of this
manual.
3.
Turn on one of the computers on the cordless network.
4.
Rerun the Symphony Composer Installation Wizard from the Sym-
phony folder of the Start Menu’s Programs group and click <Next>.
5.
Configure a Security Code for the cordless network and click <Next>.
