34
You can disable this feature by unchecking the Always prompt user at
startup box within the Switcher configuration screen. Likewise, if the
prompt does not appear, you can enable this feature by checking the box. This
configuration option is not available on Windows ME computers.
Switching Between Profiles
The Location Switcher offers three ways to toggle between profiles:
❑
Method 1: Right-click the Switcher icon in the Windows System Tray
and select the Switch option from the pop-up menu to choose
between profiles.
❑
Method 2: Select a profile when prompted during boot-up, as
described above.
❑
Method 3: Launch the Switcher configuration screen, select a profile
from the Switch to Profile drop-down menu, and click <Switch>.
Note:
Methods 1 and 3 may require that you restart the computer when
you change the profile so that the new settings can take effect.
Editing a Profile
To edit the network settings for a particular profile, follow these steps:
1.
Select a profile from the Switch to Profile drop-down menu on the
Switcher Configuration screen.
2.
Click <Edit Profile...>.
3.
Select one of the configuration headings on the left-hand side of the
screen to view and edit a profile’s parameters.
4.
After you have made changes to a profile’s network settings, click the
<Save Changes> button.
5.
Restart the computer if prompted.
Each of the configuration headings is described below.
