![Proxim 5012-SUI Скачать руководство пользователя страница 25](http://html1.mh-extra.com/html/proxim/5012-sui/5012-sui_installation-and-management-manual_1621059025.webp)
Installation and Initialization
Tsunami MP.11 5012/5054-SUI Installation and Management
Installation Procedure
25
Step 9: Align the Antenna
Antenna Alignment Display (AAD) provides a measurement of signal quality in an easy-to-interpret manner—a numeric
printed signal value at the CLI. The SNR is numerically displayed on the CLI by two decimal characters representing a
number from 00 to 99.
To start the display, you must enable AAD and a wireless link must be established between the BSU and the SU.
Aiming is complete if moving in any direction results in a falling SNR value.
Antenna Alignment Commands
set aad enable local:
Enables display of the local SNR. Local SNR is the SNR measured by the receiver at the
near end.
set aad enable remote:
Enables display of the remote SNR. Remote SNR is the SNR as measured by the receiver
at the far end.
set aad enable average:
Enables display of the average SNR. The average SNR is the average of the local and
remote SNR.
set aad disable:
Disables Antenna Alignment Display (Ctrl-C also disables AAD).
Step 10: Install Documentation and Software
To install the documentation and software on a computer or network:
1. Place the CD in a CD-ROM drive. The installer normally starts automatically. (If the installation program does not start
automatically, click
setup.exe
on the installation CD.)
2. Click the Install Software and Documentation button and follow the instructions displayed on the installer windows.
The following documentation and software products are installed:
–
Available from
Start > All Programs > Tsunami > MP.11 [Model Name]
:
•
Documentation (in
Docs
subdirectory):
–
Installation and Management Guide
–
Quick Installation Guide
–
Reference Manual
–
Safety and Regulatory Guide
–
Recommended Antenna Guide
–
Antenna Installation Guide
•
Online Help
•
Scan Tool (in
Scan Tool
subdirectory)
•
TFTP Server (in
TFTP Server
subdirectory)
NOTE:
All of these items are also available from
C:\Program Files\Tsunami\MP.11 [Model Name]
.
–
Available from
C:\Program Files\Tsunami\MP.11 [Model Name]
:
•
Documentation (in
Docs
folder): See list above
•
Help files (in
Help
folder; click on index.htm to access)
•
TFTP Server and Scan Tool program (in
Extras
folder)
•
MIBs (in
MIBs
folder)
Содержание 5012-SUI
Страница 1: ...Tsunami MP 11 Installation and Management Guide Model 5012 SUI Model 5054 SUI Version 4 0 0...
Страница 41: ...System Overview Tsunami MP 11 5012 5054 SUI Installation and Management Virtual Local Area Networks VLANs 41...
Страница 78: ...Configuration Tsunami MP 11 5012 5054 SUI Installation and Management SNMP Parameters 78...