Chapter 3 Software Utilities
PA-5822 USER MANUAL
Page: 3-58
3.4.4
Update Procedure
I.
Prerequisites
1.
Prepare a bootable media (e.g. USB storage device) which can boot the system to
DOS prompt.
2.
Download and save the BIOS file (e.g.
67221PD1.bin
) to the bootable device.
3.
Copy AMI flash utility – AFUDOS.exe (V5.07.01) into the bootable device
4.
Make sure the target system can first boot to the bootable device.
(1)
Connect the bootable USB device.
(2)
Turn on the computer and press <Del> or <Esc> key during boot to enter
BIOS setup menu.
(3)
The system will go into the BIOS setup menu.
(4)
Select [Boot] menu as the picture shown below.
(5)
Select [Hard Drive BBS Priorities] and set the USB bootable device as the
1
st
boot device.
(6)
Press <F4> key to save the configuration and exit the BIOS setup menu.
Содержание PA-5822 M1
Страница 10: ...vii Figure 3 26 Boot Menu Screen 3 52 Figure 3 27 Save Exit Menu Screen 3 54...
Страница 32: ...Chapter 2 Hardware Configuration PA 5822 USER MANUAL Page 2 11 Jumper Diagrams Jumper Settings...
Страница 119: ...Appendix A System Diagrams PA 5822 SERIES USER MANUAL Page A 2 HDD Tray Disassembly...
Страница 120: ...Appendix A System Diagrams PA 5822 SERIES USER MANUAL Page A 3 MSR module Assembly...
