When switched off, the touchscreen can be stored at a temperature from -20 °C to 60 °C (-4 °F to 140 °F)
and relative humidity from 10% to 90% (without condensation).
Install the touchscreen on a stable, leveled and vibration-free surface/wall to avoid damage to the
touchscreen. Make sure that all of the ventilation openings, which are located at the back of the
touchscreen stay uncovered, so that hot air can escape.
WARNING!
Disconnect the power cable during a thunderstorm. For extra safety, we
recommend using an overvoltage protection device, to prevent the touchscreen from
sustaining damage as a result of power surges or lightning strikes.
3.2. Cabling
Only use the power cable supplied by Prowise to connect the EntryLine UHD touchscreen to the mains
power supply. The touchscreen must be placed close to the electrical outlet and the electrical outlet
should be easy to reach. Cables should not be laid in the walkway to avoid anyone stepping on them or
tripping over them. Do not place any objects on the cables to avoid damaging them. Prevent electrical
overloads when using a distributing plug as this can lead to a short circuit.
For extra safety, we recommend using an overvoltage protection device to prevent the touchscreen
from sustaining damage as a result of power surges or lightning strikes.
CAUTION!
Only plug the power cable into grounded electrical outlets with AC 100-240V
~50/60Hz. If you are not sure about the power supply at the installation location, consult your
energy company.
Manual EntryLine UHD
8
