Prowinch PWUT Series, Руководство пользователя и предупреждения о безопасности

Страница: 8 / 22

8
1. Never overload .
2. This winch is designed to pull , not to get up!
3. Never put your hand or anything else near the gear, drum or
wire is wound. Always wear gloves when operating the winch.
4. Never try to repair or disassemble the winch in case of pro-
blems . Get help from a qualified operator or a specialist .
5. When replacing the cable , make sure the end of the cable
passes through the 4 holes on the side of the drum and tie a
stopper or a cap at the end of the cable to prevent this from
coming out.
6. Use grease the shaft and the gear before storing for prolon-
ged periods.
7. Check daily status piola steel hook state .
8. Check status fat.
2. INSTALLATION INSTRUCTIONS
Installing the winch
CAUTION
Winches facility in not properly aligned basis without the exact anchor dri-
lling immediately invalidate the unit warranty .
CAUTION
The customer assumes responsibility to install your unit by qualified and meet
the standards required in this manual people. A poor installation can cause
serious accidents to users and close to the place of operation of the unit people.
Poor or improper installation the warranty will expire immediately the unit, as
in the case of making an electrical connection that does not meet the specifica-
tions described in the User Manual and Safety Precautions in each unit or the
general rules for consumption.
Installation
instructions