Server System
User’s Manual
13
2.3.2 Rear View
1.
Power On/Off Switch
–
Use this switch to power on the system.
2.
COM1 Serial Port
–
The system has one COM1 serial port.
3.
RS232 Port (Phone-Jack)
–
This is used for upgrading the firmware of JBOD
Controller SAS Expander board.
4.
VGA Port
–
Use this to connect a VGA monitor.
5.
LAN Ports
–
The system comes with two 10Gb Ethernet ports LAN0 and LAN1.
6.
LAN Port LED Indications
–
There are two LEDs on each LAN port. Please refer
to the table below for the LAN port LED indications.
Dedicated IPMI LAN Port LED Indications
Activity / Link LED
Speed LED
Status
Description
Status
Description
Off
No Link
Off
10M bps connection or no link
Blinking Yellow
Data Activity
Yellow
100M bps connection
On
Link
Green
1Gbps connection
