Camera Management
DVR User Manual
23
Quickly Add
Check the cameras and then click “Add” to add cameras. Click
to edit the camera’s IP
address, username and password and so on. Click “Default Password” to set the default
username and password of each camera.
Add Manually
Input the IP address, port, username and password of the camera and then select the protocol.
Click “Test” to test the effectiveness of the input information and then click “Add” button (you
can input one camera’s information or above such as IP address, username and password before
clicking “Add” button). Click
to delete the camera. Click “Default Password” to set the
default username and password of each camera.
4.2.2 Edit Camera
Click “Edit Camera” in the setup panel to go to the interface as shown below. Click
to
view the live image of the camera in the popup window. Click
to edit the camera (see
Add camera
in 3.1Startup Wizard for details). Click
to delete the IP camera.
