PR- USER MANUAL
www.provision-isr.com
HDMI Extender over Cat5e/Cat6
I. Introduction
This HDMI Extender allows you to extend your HDMI signal over
standard Network cable.
While HDMI cables are expensive, inconvenient to wire and suffer
from very limited transmission distances – Ethernet cables offers a
wonderful alternative.
PR- enables you to extend HDMI signal to remote display
unit to a maximum of 60 meters over Ethernet cable while
maintaining your remote controller active (from the display unit
location).
II. Features:
1.
Transmits HDMI signal up to 40m distance over single Cat5e and
up to 60m over single cat6 cable
2.
HDMI 1.3 & 3D Support
3.
12Bit deep color and bandwidth of up to 225 MHz support
4.
Support video resolution up to 1080P@60Hz
5.
Support audio format: DTS-HD / Dolby- true HD / LPCM7.1 /
DTS / Dolby-AC3 / DSD
6.
DC5Vpower supply is included
Note:
Distance
may
be
affected
by
the
cable
quality,
length
and
other
environmental
interferences.
III. Product interface pictures
Transmitter(Tx) Receiver(Rx)
Port name
Description
HDMI IN/OUT HDMI signal input/output
UTP
RJ45 port;
RST
According to the connected cable length to make adjustment
of RST (If you change your display unit and/or cable length,
you must use it)
EDID
EDID Copy button, Press 3 seconds to copy display
configuration from the transmitter. If there is no display after
connection to display connect, restore default by RST.
DC/5V
Power adapter socket
LED indicator Description
PWR
System power indicator
STA
HDMI signal indicator
