Haptic Devices Documentation
Page 5 on 34
3
–
BLUETOOTH PAIRING
To use the Haptic device, you first need to power it on and pair it with Bluetooth on your OS (Android for Oculus
Quest and Windows for PC HMDs).
3.1
–
O
N
W
INDOWS
If your computer does not have Bluetooth, plug in the provided Bluetooth dongle and enable Bluetooth. To pair
it to Windows 10, power your module on and make sure it is not connected to another computer/phone/Oculus
Quest before (the batteries level LED should blink).
1.
Open the Windows settings.
2.
Click "Devices".
3.
Click "Bluetooth and other devices".
4.
Turn on the Bluetooth if it isn't done.
5.
Click "Add Bluetooth or other device".
6.
Click "Bluetooth".
7.
(as mentioned above, all the haptic device
are called “ForceTube” on the Bluetooth pairing and on the
Companion app.)
Your module
should appear with numbers aside. It’s your
module
’s ID.
8.
Click on your ForceTube.
9.
Wait a few seconds while your module is pairing to Windows.
5
4
