Proton ICS-1290 Скачать руководство пользователя страница 43

Страница: 43 / 115

Data Format Editor Commands

Send Commands

Send all characters

Command format=F1xx(xx: hexadecimal of the character to be

inserted)

Outputs all characters to the right of the cursor and then outputsthe

character xx.

Refer to the

ASCII Conversion Chart

for decimal, hex and character

codes.

Send a number of characters

Command format=F2nnxx(nn:00-99, the length of the character to be

sent; xx: the hexadecimal value of the character to be inserted)

Outputs nn characters to the right of the cursor and then outputs the

character xx.

Refer to the

ASCII Conversion Chart

for decimal, hex and character

codes.

Send all characters before the last few characters

Command format = E9nn (nn: 00-99, the length of the lastcharacter

not output)

Outputs all characters from the right side of the cursor to the front of

the last nn characters (left side). The cursor moves to the right of the

last transmitted character (that is, to the left of the last nn characters).

Refer to the

ASCII Conversion Chart

for decimal, hex and character codes.

Insert a character multiple times

Command format=F4xxnn(xx: hexadecimal value of the character to

be inserted; nn:00-99, times of characters output)

The character xx is output nn times, and the cursor position is

unchanged.

Refer to the

ASCII Conversion Chart

for decimal, hex and character codes.

Data format configuration

Scan the "

Data Format Off

" barcode. The barcode data is output accordingto

the data content without adding data format, but includes the prefix and suffix.

(8860010.)

Data Formatter Off

Содержание ICS-1290




















































































































Результаты поиска

Содержание ICS-1290

Отзывы:

Бренды по названию

Популярные бренды

Proton ICS-1290, Руководство пользователя

Результаты поиска

Содержание ICS-1290

Отзывы:

Бренды по названию

Популярные бренды