ProteOn XPR36, Руководство пользователя

Страница: 75 / 288

Creating and Editing Protocol Steps
57
To set the temperature step:
1. In the Protocol Editor, select Set Temperature in the Step list. The
setting appears in the Protocol Steps list and its details appear in the
Step Details panel.
2. You can enter a step name that is up to 32 characters long. The default
name is Set Temperature. The temperature range is 15.0–40.0°C. For
edited
protocols, the default is the temperature entered in the Sensor
Chip box on the Instrument Control screen. Existing or copied protocols
use the temperature settings specified in the original protocol.
3. You can enter a wait time of up to 24 hr.
The reference SPR curve is recalculated as soon as the Wait after temperature
reached delay has timed out. Once the temperature is reached and the Wait
after temperature reached time expires, the SPR curve is recalculated. While
the Set Chip Temperature step is being executed, data continue to display on
the Run screen but are not recorded.
Setting the Change Rack Step
The Change Rack step switches between sample holders at any point in a
protocol. You can switch between sample holders without having to use all
the wells or vials in that holder. You can assign the rack changes in any order.
If you drag a step that does not have a sample associated with it, a sample is
automatically assigned.