Protek A334M, Руководство пользователя

Страница: 21 / 50

1 GENERAL OVERVIEW
21
© 2015 GS Instruments, Co., Ltd
4 Operation
4.1 Preparation for use
4.1.1 IP Address Setting
A334M PC GUI is communicated with A334M by Ethernet, and every single port
of A334M is set with individual IP address. Therefore, the PC IP address has to be
changed for the communication between PC and A334M.
IP address of each port
Port 1 192.168.0.81
Port 2 192.168.0.82
Port 3 192.168.0.83
Port 4
192.168.0.84
Port 5 192.168.0.85
Port 6 192.168.0.86
Table 4.1 IP address of each port
For the communication between PC and A334M, IP address of 192.168.0.xxx
must be set except from 192.168.0.81 to 192.168.0.86 because the IP address of
each port is from 192.168.0.81 to 192.168.0.86. The instructions for IP address
setting is following.
1. As you see below, please click and enter to ‘Network and sharing center’
Figure 4.1 “Network and Sharing center” icon at yellow box.
2. Please click “Network and Sharing Center’ -> “View your active networks”
-> Local area connection