PLM-8000 Operation Manual
24
(7) Align the horizontal and vertical bar with the both sides abstract point by using the
direction indicator button
(8) Press the read button to store the measure value.
(9) Press the EXIT button
(10) Press the Print button to print out the measured value
5.8 Power-saving mode
The power-saving mode is activated if no operation(Not operated read button and touch) or
no measure is carried out for approximately 5 minutes, 10 minutes, 30 minutes in the
measurement mode. In the power-saving mode, the READY lamp flickers. If pushing the
Read button or touch, it is returned to the measurement mode in the power-saving mode.
5.9 Connection with external optometry
equipment
Using an external connection socket, can be connected with external optometry equipment.
The external optometry equipment of the POTEC are connected by connector cable which
be provided from POTEC.
(1) Connect on the printer socket of the left side on the real bottom to a 6-pin connector
cable which be provided from Potec.
External device connection connector
(2) Connector cable to connect to the external device.
(3) Measured the Lens.
(4) Click the printer button in the menu.
CAUTION
When user connected external optometric equipment , determine the
pin number of connectors.
Recommended Products : Optometry equipment of POTEC
(PRK-7000, PRK-8000, PDR-7000).
USB port to upgrade the system's specifications for the terminal.
Service personnel will be used.
!
NOTE
!
NOTE
