RDM0012 Issue 1 AA
Page 30 of 35 © Protec Fire Detection PLC 2017
8.0
Engineer Menu Guide
Basic settings can be configured on the device itself through the engineer menu by a suitably trained
person. The menu is accessible once logged in to access level 3 on the device.
8.1
Login to Access Level 3
In order to access the engineer menu a suitably trained person must enter the level 3 access code.
A.
Starting from the home or event screen.
B.
Pressing the ‘Login’ button moves to the login screen.
C.
Enter the level 3 access code by using the ‘Up’▲ and ‘Down’▼ buttons to cycle the currently
visible digit.
D.
Press the ‘Select’● button to accept the digit and then move to the next.
E.
Repeat until the entire code is entered. If the code was correct the engineer menu will be
opened, otherwise the device will return to the previous screen.
A
B
C
D
