RLX-FHE, RLX-FHES, RLX-FHS
♦
RadioLinx FH
Reference
Frequency-Hopping Industrial Radio
Page 120 of 151
ProSoft Technology, Inc.
November 25, 2008
15.1.14 Device
Network
Properties Dialog Box
The Device Network Properties dialog box opens when you open the Properties
menu, and then choose Device Networks. Use this dialog box to view or modify
the list of device networks associated with this radio network.
Note:
This option is available only for certain radio types. For more information, please refer to the
user manual for your radio.
Device Network Name:
Type the Device Network Name in this field, and
then click the Add to List button to add it to the Device Network List.
Add to List:
Type the Device Network Name in the Edit Field, and then click
this button to add it to the Device Network List.
Protocol:
Select the protocol for this device network from the dropdown list.
Device Network list:
This window shows a list of available device networks,
sorted by network name and protocol.
Edit Existing List:
Click to edit existing items in the Device Network List.
Delete Network:
Select a network from the Device Network list, and then
click this button to delete (permanently remove) the network from the list.
Edit Existing List
OK:
Click the OK button to save your selection and close the dialog box.
Cancel:
Click the Cancel button to close the dialog box and discard your
changes.
Help:
Click the Help button to read the online help for ControlScape.
15.1.15
Edit BootP Table Dialog Box
The Edit BootP Table dialog box opens when you click the Edit Radio IP Address
button on the Select Radio dialog box. Use this dialog box to associate IP
addresses with radios.
BootP Table:
The BootP Table is a list of radios, sorted by serial number and
IP Address.
Add:
Click the Add button to add a new radio to the table. This action opens
the Set a Radio IP Address dialog box (page 128).
Edit:
Select a radio from the table, and then click the Edit button to modify
the IP address for the selected radio. This action opens the Set the Radio IP
Address dialog box (page 128).
Delete:
Click this button to delete (permanently remove) the selected radio
from the table.
OK:
Click the OK button to save your selection and close the dialog box.
15.1.16
Ethernet Radio Parameters Dialog Box
The Ethernet Radio Parameters dialog box opens when you open the Diagnostic
menu, and then choose
Ethernet Radio
.
Use this dialog box to view the settings for each Ethernet radio connected to your
network.
Ethernet Radio List:
This is a list of all Ethernet radios currently detected.
