ILX56-PBS
Setup
ControlLogix® Platform
User Manual
Page 15 of 87
PROFIBUS
– Slave Mode
The ILX56-PBS PROFIBUS configuration is shown in the following figure. The ILX56-PBS
PROFIBUS configuration window is opened by either double-clicking on the module in the
tree, or right-clicking the module and selecting
Configuration
.
Figure 3.7
– ILX56-PBS PROFIBUS configuration – Slave Mode
The PROFIBUS slave configuration consists of the following parameters:
Parameter
Description
BAUD Rate
Baud Rate
(in Kbps) of the PROFIBUS network: 9.6, 19.2, 45.45,
93.75, 187.5, 500, 1500, 3000, 6000 or 12000 Kbps. The baud rate selected
should be supported by the PROFIBUS master. The baud rate should be
selected depending on the cable length, see chapter “
PROFIBUS DP
”
Table 3.2 - PROFIBUS configuration parameters
– Slave Mode
