Radio Configuration / Diagnostic Utility
RLXIB-IHW-66
♦
802.11a, b, g
User Manual
Industrial Hotspot
ProSoft Technology, Inc.
Page 55 of 109
May 18, 2009
4.3.5 Hide Network SSID
If you want your radio network to be hidden from other 802.11 users, click the
Hide Network SSID check box in each radio you want hidden. With the SSID
hidden, your network does not show up when other clients scan for an access
point. You can still connect clients to the "hidden" network by typing the Network
SSID.
4.4
Radio access settings
The following fields appear in the Security Settings area on the right side of the
Radio Configuration window.
Note:
Different versions of the RLXIB Radios support different functionality. You may see more or
fewer options on this page, depending on the version of the radio you purchased.
In order to configure or diagnose a radio using its built-in Web server or SNMP
agent, both your computer and the radio must have IP addresses, and these IP
addresses must be on the same subnetwork. An IP address is only needed so
you can configure the radio and view its diagnostic settings. Otherwise, the
address is unnecessary.
Field Description
Obtain IP address - DHCP Select this option to allow the radio to obtain its IP address from a
DHCP server.
Use the following IP
address
Select this option to specify a Static IP address to the radio. Enter the
IP address information in the following fields.
IP Address
Enter an IP address that will not interfere with any other devices on the
network. Request a block of IP addresses you can use from your
Network Administrator.
Subnet Mask
Enter the Subnet Mask provided by your Network Administrator.
Default Gateway
Enter the Default Gateway address provided by your Network
Administrator.
Primary DNS
Enter the Primary DNS address provided by your Network
Administrator.
Secondary DNS
Enter the Secondary DNS address provided by your Network
Administrator.