ProSoft Technology RadioLinx RLXIB-IHW-66 Скачать руководство пользователя страница 35 | Manualshive

Страница: 35 / 109

ProSoft Technology RadioLinx RLXIB-IHW-66 Скачать руководство пользователя страница 35

Radio Configuration / Diagnostic Utility

RLXIB-IHW-66

♦

802.11a, b, g

User Manual

Industrial Hotspot

ProSoft Technology, Inc.

Page 35 of 109

May 18, 2009

4.1 Radio

Status

The following fields appear in the status area at the top of the Radio
Configuration window.

Note:

Different versions of the RLXIB Radios support different functionality. You may see more or

fewer options on this page, depending on the version of the radio you purchased.

Use the settings in the Radio Status panel to view the current settings for this
radio.

Field Description

Radio Name

The name of the selected radio.

Radio MAC

The MAC address of the selected radio. The MAC ID is also printed on
the side of the radio.

Firmware

The version of firmware currently installed. All radios on the network
must have the same firmware versions installed. For more information
on firmware versions, refer to Update firmware (page 64).

Update every

This value in seconds controls how often the web configuration form
automatically refreshes. To change the value temporarily, enter the new
value and press the [Tab] key. To change the value permanently, enter
the new value and press the [Enter] key.

Up Time

The length of time the radio has operated since the last system power-
up or last system reset.

Signal Strength

Strength of the signal from the Parent radio.

Parent MAC

The MAC address of the parent radio to which the selected radio is
linked.

Branch Length

The number of RF links from the radio to the master radio.

# Radios Linked

The number of other radios that are linked to this radio.

Link Time

The length of time the radio has been continuously connected to a
parent radio.

Available Parents

Click this button to view the list of Access Points (Parents) from which
this radio can detect beacons. This button is only available when the
radio type is Repeater.

Address Table

Click this button to view a list of MAC addresses for devices entered in
the radio’s address table.

Port Status

Click this button to view spanning tree status of each switch port, for RF
ports and the RJ45 (Ethernet) port.

«
...
33
34
35
36
37
...
»

Содержание RadioLinx RLXIB-IHW-66














































































































Отзывы:

Нет отзывов