RLX2-IHx Series ♦ 802.11a, b, g, n
Using the IH Browser to Manage your Radios
Industrial Hotspots
User Manual
ProSoft Technology, Inc.
Page 146 of 248
Setting the Event Log Filter
The
Event Filter
dialog box allows you to include or exclude specific event types from the
Event Log. The filter conditions that you set in this dialog box affect both the display of
events in the
Event Log
dialog box, and the events in the file you create when you click
S
AVE
in the
Event Log
dialog box.
Note: The filter conditions are reset to the default state (include all events) when you close the Event Log
dialog box.
1
In the IH Browser, click on a radio in either the
List View
or
Topology View
.
2
From the
I
NFO
menu choose
E
VENT
L
OG
, or right-click the radio and choose
E
VENT
L
OG
.
3
In the
Event Log
dialog box, click
F
ILTER
.
4
Double-click on an event in the
E
VENT
L
IST
to add it to the
S
ELECTED
E
VENTS
list. An
asterisk (
*
) appears next to the event types in the Selected Events list.
You can double-click on the event in the
E
VENT
L
IST
a second time to remove it from
the
S
ELECTED
E
VENTS
list.
5
Use the
E
VENTS SHOULD BE
parameters to include only the selected events, or
exclude the selected events.
Parameter
Description
Event List
Displays a list of different types of events in the log, sorted by
E
VENT
ID
. By
default, this list only includes events types that are in the radio's Event Log.
Double-click an event type to add it to the Selected Events list.
Double-click the event type again to remove it from the Selected Events
list.
Show all events
Select this check box to show all event types, even if the type is not in the
radio's Event Log.
Selected Events
Displays the list of selected event types.
Events should be
Specifies whether to include only the selected events, or exclude them.
I
NCLUDED
-
Show only the selected events in the Event Log.
E
XCLUDED
-
Show all events in the Event Log except the selected events.