About the Sample PLC5 Program
5604-RIO-PDPMV1
♦
ProLinx Standalone
Rockwell Automation® Remote I/O to PROFIBUS DP-V1 Master Gateway
ProSoft Technology, Inc.
Page 13 of 45
November 20, 2008
3.3
Download the Sample Program to the Processor
To download the sample program from RSLogix 5 to the PLC processor:
Note:
The key switch on the front of the PLC processor must be in the REM position.
1
If you are not already online to the processor, open the Communications
menu, and then choose Download. RSLogix will establish communication
with the processor.
2
Click the Download button to transfer the sample program to the processor.
3
When prompted, choose Computer to PLC
4
RSLogix will compile the program and transfer it to the processor. This
process may take a few minutes.
