12
PRS-UM-DP8-EN-Rev.4.1-16.08.2021
Main Board and Connections
S-DP8 Control panel has one integrated main board. All components and connections are
located on main board.
Main Board Details:
S-DP8 Control panel has all connections on main board.
Diagram 11
: Control panel main board
As shown in the picture, there is a 3V battery on the panel electronic board to keep data and
time information. Battery lifetime is 3 years. It should be replaced when it is run off.
There are five sockets on the main board to install optional relay modules. Each relay
module has 8 relay on it and each relay controlled by one detector. It is possible to take
independent output from each detector with optional relay modules. The relay module
install location should be used as follows:
1. Zone (1. Bölge): Not in use
2. Zone (2. Bölge): Fault
3. Zone (3. Bölge): Alarm 1
4. Zone (1. Bölge): Alarm 2
5. Zone (1. Bölge): Not in use
LCD brightness adjustment potentiometer
Relay module mounting holes
Main power
input
Backup
battery input
Detector input ports
Clock battery
Digital input
Relays and relay outputs
Buzzer
Relay test buttons
