SI-168U Portable USB Soldering iron
User’s Manual
Thank you for purchasing the SI-168U Portable USB Soldering iron.
Please read this manual before operating the SI-168U. Please store the
manual in a safe, easily accessible place for future reference. This is a
fully functional USB powered soldering iron brings you more convenient.
Compact and slim for portability with rapid heat up and instant recovery.
Specifications:
SI-168U
Power Supply
USB Input DC5V
Power Consumption
8W
Temperature
480°C ± 10%
Auto Sleep Mode
25S
Indicator
LED Light
USB Length
1.5M
Replacement Tip
9SI-B162-T
Accessories
USB wire, cap ,solder stand and solder wire
Dimension
Ø 19x163mm
Features:
USB powered soldering iron, easy carry and repair.
Fast heating up in less than 15 seconds, cooling down in less
than 30 seconds.
Auto sleep mode for power saving and prolonging the lifetime of
heater.
8W Low power consumption and high temperature reach to
480°C.
Replaceable long life tip for greater efficiency and long service
life
Metal touch switch control provides fast heating response.
Working indicator to avoid accident.
Caution:
•
When the power is on, the tip temperature is reach to 480°C.
Mishandling may lead to burns or fire.
•
The first time use the soldering iron, when it strart to heating up, it
will have slightly smoke in initial 10 minutes, it is normal condition.
•
Do not touch the metallic parts near the tip.
•
Do not use the product near flammable items.
•
Do not modify the unit.
•
Use only genuine replacement parts.
•
Do not use the product near flammable items.
•
•
Do not wet the unit or use the unit when your hands are wet.
•
The soldering process will produce smoke, so make sure the
area is well ventilated.
•
While using the unit, don't do anything which may cause bodily
harm or physical damage.
How to solder:
1.
Properly connecting power by USB wire
2.
Touch the metal switch to start the soldering iron to heat up.
3.
Apply rosin-based solder to the part and melt it with the
soldering iron.
Note:
when using non-rosin-based solder, be sure to apply a
soldering paste to the part before applying the solder.
SI-168U USB
烙鐵使用說明書
感謝您購買寶工
SI-168 USB
烙鐵，採用
USB
供電設計
DC5V
，焊接
不受環境限制，
8W
低功耗，最高溫可達
480°
C，使用更安全，使用
前請先詳閱說明書。
規格
:
規格
:
SI-168U
工作電壓
USB DC 5V
消耗功率
8W
溫度
480°C ± 10%
自動休眠
(
秒
)
25
工作指示燈
紅色
LED
USB
連接線
長度
1.5M
選購烙鐵頭
型號
:9SI-B162-T
配件
USB
連接線
,
保護蓋
,
烙鐵架
,
錫絲
尺寸
Ø 19x163mm
功能介紹:
USB
供電設計，外型輕巧，便於攜帶及維修。
15
秒內快速升溫無需等待，靜置約
30
秒左右進入休眠，快速降
溫，
安全又安心。
自動休眠設計可延長烙鐵頭壽命，同時達到節能又環保的目地。
.
8W
低功率設計，溫度可達
480°C
。
長壽命烙鐵頭提供更佳的效率及更長的使用壽命。
金屬觸控開關提供更快的升溫啟動反應。
工作指示燈設計可提醒烙鐵處於使用中以避免意外。
注意事項
:
當接通電源時，烙鐵頭溫度高達攝氏 480 ºC，濫用可能導致灼傷
或火災。
第一次使用，開始升溫時會冒出些許煙霧，約 10 分鐘後便消失，
此為正常現象。
請勿觸及烙鐵頭附近的金屬部份。
請勿在易燃物體附近使用烙鐵。
更換部件或裝配烙鐵頭時，應關閉電源，並待烙鐵頭冷卻至室溫。
請勿使用於焊接以外的工作, 勿擅自改動烙鐵。
更換部件時，應採用原廠配件。
請勿弄濕烙鐵，手濕時也勿使用烙鐵避免觸電。
焊接時溶錫會冒煙，現場應有良好通風設備。
使用烙鐵時不作任何可能傷害身體或損壞物體的舉動‧
使用方法
:
1.
將 USB 連接線接上烙鐵及 USB 電源輸出孔。
2.
輕觸金屬觸控開關開始加熱。
3.
將松香基焊料塗到工件上並用烙鐵熔化。
注意：當使用非松香基焊料時，在使用焊料前一定要向工件上塗一層
焊膏。
All manuals and user guides at all-guides.com
all-guides.com
