MA-1004 Desk Type Magnifier Lamp
Thank you very much for purchasing
Pro’sKit
Desk Magnifier Lamp. The Desk Magnifier Lamp is ideal for precise
work at home, office and workshop as well as a lot of other important places. Before using the Desk Magnifier Lamp,
please read the following instructions
：
Lighting adjustment, Energy saving
Comes with 56 LEDs provide bright lighting
and only 9W consumption
Reach to 50,000 hours, 20X longer
lifetime
The LED features long lifetime up to 50000
hours which is 20 times longer lifetime than
incandescent lamp.
3D [1.75X] glass lens
Design with 3D (1.75X) magnification glass
lens, great for working on hobbies, PCB and
documents
.
Zero electromagnetic interference
Comes with switching adapter, more
environment friendly and provides even more
stable performance.
Easy positioning
The adjustable arm allows angling and
pointing the light to where you need.
Specification
：
Specifications
MA-1004A
MA-1004F
Lens material
Glass
Magnification
3D (1.75X)
Lens size
127
×
79 mm
Light source
56 pcs LEDs
Energy consumption
9 W
Color temperature
6000~7000 Kelvin
Luminance
about 650 Lumen
Main body
Overall length
38 x 18.5 x 19 cm
Input
AC 110~120V 50/60Hz
AC 220~240V 50/60Hz
Output
DC21V 0.35A
Switching
adapter
plug type
A type
F type
Standard accessories
Switching
Adapter &
Hex key
wrench
：
H4.0
×
65
×
22 mm
How to use
：
A. Before use, remove all packages around the lamp.
B. Put the lamp on the horizontal table.
C. Insert the adapter’s DC plug into the socket located on the backside of arm near to the base. (See picture )
D. Insert the adapter’s AC plug into a conveniently located electrical socket.
E. Turn on the lamp by using the ON/OFF switch located on the backside of arm near to the base.. (See picture)
F. Use the hex included in the package to adjust the head in the desired position.
G. Keep the hex in the plastic case and hang on the power cord to avoid missing.
Caution for safe using
：
A.
Indoor use only. Please take 5 minutes rest after using 30 minutes to protect your eyesight.
B.
Environment temperature
：
-10
C~40
C.
C.
Humidity
：
95%.
D.
Never disassemble the magnifier lamp unless you are a qualified electrician.
E.
Plug must be taken out while repairing the magnifier lamp or not put to use.
F.
Never leave the lens unattended in direct sunlight or where light can shine through it. This constitutes a fire
hazard. Please close the cover when not use the lamp.
G.
If the external flexible cable or cord of this magnifier lamp is damaged, it shall be exclusively replaced by the
manufacturer or his service agent or a similar qualified person in order to avoid a hazard.
Test Equipment Depot - 800.517.8431 - 99 Washington Street Melrose, MA 02176 - TestEquipmentDepot.com
