Proroute H685, Руководство пользователя

Страница: 52 / 109

E-mail: support@proroute.co.uk www.proroute.co.uk
-
Authentication password : SNMPv3 authentication password, at least 8 characters is
required.
-
Encryption password : SNMPv3 encryption password, at least 8 characters is required.
After all items is setup, click button “ Save & Apply ” to enable SNMP functionality.
3.5.6
GPS
The H685 does not have GPS as standard. Units with GPS can be specially ordered.
-
Enable : Check this button to enable GPS
-
Only GPRMC: If checked, it will only send GPRMC data info (Longitude Latitude altitude)
-
Prefix SN No.: if checked, it will add the router SN to the data packet
-
Send interval: Set the frequency of GPS data packets being sent
-
GPS Send to : Choose “Serial” or “TCP/IP”. The router will only receive the GPS signal and
will not process it. It will send this GPS signal to your GPS processor devices or servers. If
the GPS processor device is connected to the 685 Router via a Serial Port, please choose
“Serial”.
-
If the GPS processor device is a remote server, please choose “Serial”
If the GPS processor device is a remote server, please choose “ Serial ”.
-
GPS to TCP/UDP Settings
-
Server IP : fill in the correct destination server IP or domain name.
-
Server port : fill in the correct destination server port.