Proroute GEM420 4G M2M Router
GEM420 User Manual
162
Reset to Default
You can reset this device to factory default settings by clicking the “Reset” button.
Wake on LAN
Wake on LAN (WOL) is an Ethernet networking standard that allows a computer to be
turned on or awakened by a network message. You can specify the MAC address of
the computer, in your LAN network, to be remotely turned on by clicking on the “Wake
up” command button.
Backup Configuration Settings
You can backup your settings by clicking the “Backup” button and save it as a bin file.
Once you want to restore these settings, please click Firmware Upgrade button and
use the bin file you have saved.
3.4.2 Scheduling
You can set the schedule time to decide which service will be turned on or off. The
added rules will be listed.
1. Time Scheduling:
Enable or disable the scheduling function.
2.
Add New Rule
: Click the “Add” button to create a schedule rule. When the next
dialog popped out you can edit the Name of Rule, Policy, and set the schedule
time (Week day, Start Time, and End Time). In a schedule rule, it collects 8 time
periods to organize it. You also can specify the rule is to define the enable timing
(“Inactive except the selected days and hours below”) or disable timing (“Active
except the selected days and hours below”).
