________________________________________________________________________________
11
–
Lift trolley Lift&Drive
325P+
5.2.6
Wheels
Make sure all wheels run smoothly.
Lubricate the bearings.
Check that the tire rubber is intact.
5.2.7
Brakes
Check that the breaks work.
5.2.8
Knobs for handlebar and bracket for remote control
Check that the knobs loosen and tighten correctly.
5.2.9
Replacing the fuse
The fuse is located inside the power pack. A wiring diagram for the lift trolley is attached to the
inside of the lid of the power pack. Before removing the lid, by loosening the screws, the user
should apply the brakes and wear protective footwear. Be extra cautious when opening the power
pack. If the device is tilted after the lid has been removed, the batteries can slide out of the power
pack and harm the user.
5.2.10
Replacing the batteries
Batteries may be replaced by a person with basic technical knowledge. When changing batteries
protective footwear should be used the brakes should be applied. To open the power pack, see
section
Replacing the fuse
. Used batteries should be handed in to a recycling centre.
