PRONAR T780, Перевод оригинальной инструкции, Страница: 75 / 83

5.16
ATTENTION!
Assembly and disassembly of the frame should be carried out with the use of
appropriate platforms, ladders or when standing on a ramp. These tools must be in good
condition to fully protect the persons working on them against falling. Work should be
performed by at least two persons. Exercise caution when working.
In the final phase of folding the canvas cover, at all times hold with one hand the railing
of the fenced platform or front stake of the frame. Non-compliance with this rule can put
the user at risk of falling.
5.8 INSTALLATION AND DISASSEMBLY OF EXTENSION
WALLS
Installation of wall extensions should be performed as follows:
•
Attach rear stakes of extension walls to rear wall stakes,
•
Install middle wall extensions takes,
•
Install front and a rear wall extension,
•
Install side wall extensions,
•
Screw in side step and extension ladder to the front wall.
•
Screw in fenced platform.
Disassembly of wall extensions should be performed in reverse order.
ATTENTION!
Assembly and disassembly of wall extensions should be carried out with the use of
appropriate platforms, ladders or when standing on a ramp. These tools must be in good
condition to fully protect the persons working on them against falling. Work should be
performed by at least two persons. Exercise caution when working.
when using the trailer with a third wall extension installed there is an increased risk of:
Loss of trailer stability, trailers overturning, failure of the trailer's structural elements,
insufficient visibility of the elements of trailer's body, uncontrolled movements of the
trailer's body on an uneven terrain, the risk of overloading.