PRONAR T780, Перевод оригинальной инструкции, Страница: 70 / 83

5.11
oil with skin wash the place of contact with water and soap. Do not apply organic solvents
(petrol, kerosene). Contaminated clothing should be changed to prevent access of oil to skin.
In the event of contact of oil with eye, rinse with large quantity of water and in the event of the
occurrence of irritation consultant a doctor. Hydraulic oil in normal conditions is not harmful to
the respiratory tract. A hazard only occurs when oil is strongly atomised (oil vapour), or in the
case of fire during which toxic compounds may be released. Oil fires should be quenched
with the use of carbon dioxide, foam or extinguisher steam.
5.6 LUBRICATION
Trailer lubrication must be carried out in places indicated in figures (5.6A) & (5.7A), and also
detailed in table (5.4).
TABLE 5.4 GREASING POINTS
ITE
M
NAME
NUMBER OF
GREASING
POINTS
TYPE OF
GREASE
GREASING
FREQUENCY
1
Articulated joints and
sockets for installation of
load box.
4 permanent 2 months
2
Sockets for installation of
tipping ram cylinder
2 permanent 6 months
3 Absorber spring pins 4 permanent 6 months
4 Rocker arm pins 2 permanent 6 months
5
Absorber spring sliding
surfaces
4 permanent 1 month
6 Axle bearings 4 permanent 24 months
7
Axle expander shaft
sleeves
4 permanent 6 months
8 Absorber spring 4
anticorrosion
and penetration
6 months
9
Wall extension hinges and
wall locks
10 permanent 1 month
10 Handbrake mechanism 1 permanent 6 months