PRONAR T780, Перевод оригинальной инструкции, Страница: 53 / 83

4.10
materials shown in table (4.2). It is necessary to pay particular attention not to overload the
trailer.
Light materials with a large volume, maybe loaded even above the edge of the load box
extension walls paying special attention to trailer stability. Regardless of the type of load
carried, the user is obliged to secure it in such a manner that the load is unable to spread and
cause contamination of the road.
Construction materials can be transported using the trailer, provided the load box is properly
prepared. In order to do that lay thick plywood, hard particle board, thick planks or other
materials of similar properties on the load box platform. Side walls and optionally load box
extension walls should be protected in a similar manner. Non-compliance with these
requirements could lead to dents in the load box platform or its walls, scratching of painted
surfaces and could give rise to ingress of corrosion. Non-compliance with the instructions
provided could invalidate the guarantee.
Mineral fertilisers and other materials, which by having contact with painted or steel surfaces
may cause damage, are recommended to be carried in sealed packing (sacks, boxes, drums,
barrels etc.). After unloading the load box should be thoroughly cleaned using strong water
jet.
If the transported materials exert high local pressure on the load box platform it should be
protected against damage using thick planks, plywood or other materials of similar properties.
Oilseed rape or seeds of other plants of very small size can be transported provided the load
box is properly sealed in places where gaps are a bigger than the seed diameter. Profiled
rubber seals, silicone sealers, plastic wrap, rope or textile materials are recommended
materials to provide sealing of the load box.
ATTENTION!
Do NOT exceed permissible load weight of trailer because this may cause danger to road
traffic and cause damage to the machine.