PRONAR T780, Перевод оригинальной инструкции, Страница: 23 / 83

2.6
•
During the warranty period, any repairs may only be carried out by a Warranty Service
authorised by the manufacturer.
•
Should it be necessary to change individual parts, use only original parts or those
indicated by the manufacturer. Non-adherence to these requirements may cause
danger to the health and the user's and other people's lives, and also damage the
machine.
•
Regularly check technical condition and mounting of all guards and protective
elements.
•
Before welding or electrical work, the trailer should be disconnected from the power
supply.
•
The paint coating should be cleaned off before beginning welding work. Burning paint
fumes are poisonous for people and animals. Welding work should be carried out in a
well lit and well ventilated space.
•
During welding work pay attention to flammable or fusible elements (parts of the
pneumatic, electric and hydraulic systems, plastic parts). If there is a risk that they will
catch fire or be damaged, they should be removed before commencing welding work.
Before beginning work prepare a CO
2
or foam extinguisher.
•
In the event of work requiring the trailer to be raised, use properly certified hydraulic or
mechanical lifts for this purpose. After lifting the trailer, stable and durable supports
must also be used. Work must not be carried out under a trailer which has only been
raised with a lift.
•
The trailer must not be supported using fragile elements (bricks or concrete blocks).
•
After completing work connected with greasing, remove excess oil or grease.
•
The trailer should be kept clean and tidy.
•
Before climbing on to the load box, make sure unauthorised persons do not have
access to the character.
•
Keep a safe distance from electric power lines during unloading and when load box is
raised.