PRONAR T700M/1, Перевод оригинальной инструкции

Страница: 45 / 166

Section 2
2.15
PRONAR T700M/1
Safety advice
2.9 INFORMATION AND WARNING DECALS
The trailer is labelled with the information
and warning decals listed in table (2.1).
The arrangement of symbols is shown in
figure (2.3). Throughout the machine use,
you must ensure that any warning mes-
sages and information decals located on
the machine are clear and legible.
If any are destroyed or damaged, they
must be replaced with new. Information
and warning decals may be purchased
directly from the Manufacturer or your
PRONAR dealer.
Part numbers of information decals are
given in table (2.1) and in
Spare Parts List
.
New assemblies, changed during repair,
must be labelled once again with the ap-
propriate safety signs. During machine
cleaning do not use solvents, which may
damage the coating of information decals
and do not subject them to strong water
jets.