PRONAR T700M/1, Перевод оригинальной инструкции

Страница: 4 / 166

Introduction
2 PRONAR T700M/1
INTRODUCTION
Information contained herein is current
at date of publication. As a result of im-
provements, some numerical values and
illustrations contained in this publication
may not correspond to the factual spec-
ification of the machine supplied to the
user. The manufacturer reserves the right
to introduce design changes in machines
produced that facilitate operation and im-
prove the quality of their work, without
making minor amendments to this Opera-
tor's Manual.
This Operator's Manual is an integral part
of the machine's documentation. Before
using the machine, the user must carefully
read this Operator's Manual and observe
all recommendations. This guarantees
safe operation and ensures failure-free
work of the machine. The machine is de-
signed to meet obligatory standards, doc-
uments and legal regulations currently in
force.
If the information contained in the Oper-
ator's Manual needs clarification then the
user should refer for assistance to the sale
point where the machine was purchased
or to the Manufacturer.
It is recommended that the serial number
of the machine is inscribed in the spaces
below after purchase of the machine.
U.10.1.EN
Machine serial number
This Operator's Manual contains important safety and operating instructions for the machine. The
Operator's Manual should be kept near the machine so that it is accessible to authorized operators.
Keep this manual for future reference. If the Operator's Manual is lost or damaged, contact the seller
or the manufacturer for a copy.
The Operator's Manual is intended for the end user. For this reason, some required maintenance
activities are listed in the inspection tables but the procedure is not described in this Operator's
Manual. To perform these activities, call the manufacturer's authorized service centre
.